Load data for .30 PICRA + .308 | 180gr | Barnes X BT

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 180gr \| Barnes X BT
Manufacturer SKU:	30840
Bullet Weight:	180gr \| 11.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.390" \| 35.3mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.509" \| 12.9mm
Shank Seated Depth:	0.384" \| 9.8mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B635_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:10 - 1:8

Load data for 44 loads in caliber .30 PICRA with .308 | 180gr | Barnes X BT bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	34447	85%	**66	100%
Accurate 4100	<<locked>>	74%	36216	89%	**68	92%
[Accurate No. 11 FS]*	<<locked>>	83%	35868	88%	**75	85%
Accurate TCM	<<locked>>	63%	36172	89%	**48	98%
Alliant 2400	<<locked>>	69%	34389	85%	**42	94%
Alliant BLUE DOT	<<locked>>	72%	35186	87%	**29	99%
[Hodgdon H110]*	<<locked>>	77%	35810	88%	**88	89%
Hodgdon LilGun	<<locked>>	80%	35984	89%	**27	95%
Hodgdon TrailBoss	<<locked>>	93%	25077	62%	**4	100%
Maxam CSB 1	<<locked>>	64%	36158	89%	**1	100%
Ramshot Enforcer	<<locked>>	70%	36071	89%	**75	96%
ReloadSwiss RS 14	<<locked>>	95%	25208	62%	**4	100%
ReloadSwiss RS 30	<<locked>>	94%	34983	86%	**04	92%
SNPE Vectan A0	<<locked>>	65%	36347	90%	**1	100%
SNPE Vectan BA6 1/2	<<locked>>	94%	33866	83%	**45	97%
SNPE Vectan BA7 1/2	<<locked>>	67%	35868	88%	**40	100%
[Somchem S265]*	<<locked>>	86%	36187	89%	**42	88%
Vihtavuori 3N38	<<locked>>	69%	36013	89%	**12	100%
Vihtavuori N105	<<locked>>	70%	34127	84%	**06	100%
Vihtavuori N110	<<locked>>	87%	35737	88%	**88	95%
Vihtavuori N32C Tin Star	<<locked>>	79%	36347	90%	**3	100%
[Winchester 296]*	<<locked>>	77%	35926	88%	**11	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	62%	27180	67%	**1	100%
[Accurate 4100]*	<<locked>>	61%	24758	61%	**7	86%
[Accurate No. 11 FS]*	<<locked>>	74%	27702	68%	**63	80%
Accurate TCM	<<locked>>	61%	34084	84%	**19	97%
Alliant 2400	<<locked>>	62%	28282	70%	**53	91%
Alliant BLUE DOT	<<locked>>	61%	26382	65%	**7	96%
[Hodgdon H110]*	<<locked>>	61%	22307	55%	**1	80%
[Hodgdon LilGun]*	<<locked>>	60%	20392	50%	**4	86%
Hodgdon TrailBoss	<<locked>>	73%	18579	46%	**9	100%
Maxam CSB 1	<<locked>>	61%	32808	81%	**2	100%
Ramshot Enforcer	<<locked>>	62%	27746	68%	**60	92%
ReloadSwiss RS 14	<<locked>>	69%	16839	41%	**9	100%
[ReloadSwiss RS 30]*	<<locked>>	74%	21509	53%	**8	81%
SNPE Vectan A0	<<locked>>	61%	33475	82%	**1	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	62%	15940	39%	**7	85%
SNPE Vectan BA7 1/2	<<locked>>	61%	30734	76%	**4	100%
[Somchem S265]*	<<locked>>	68%	23989	59%	**5	80%
Vihtavuori 3N38	<<locked>>	61%	28732	71%	**20	99%
Vihtavuori N105	<<locked>>	62%	26861	66%	**14	100%
[Vihtavuori N110]*	<<locked>>	61%	18202	45%	**2	84%
Vihtavuori N32C Tin Star	<<locked>>	61%	25599	63%	**8	100%
[Winchester 296]*	<<locked>>	69%	27920	69%	**89	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data